I love my iPad Mini with its Logitech Ultraslim keyboard – it’s so portable and yet does so much! The keyboard protects the screen from bumps, but I needed something that would protect both iPad and keyboard from scratches, so I looked on Ravelry for a simple cover. Nothing quite fitted the bill, especially as I need a design that won’t snag on other items in my backpack whenever I pull it out – so I decided to design my own! Continue reading
Before embarking on a new project, if possible I always check other Ravelers’ project notes to find out the problems they faced. On many of the glove notes, the words “thumb gusset” and “hole” seemed to crop up together a lot – clearly this was a big problem! However I set the thought aside and got on with my own mitts, knowing I could come back and look for solutions later.
So, I was knitting away and got to the part where you put the thumb stitches on a holder and start knitting round the palm of the glove. I noticed there was a good centimetre of unknitted yarn spanning the gap, just like a dropped stitch – at which point any sensible knitter would have gone back to Ravelry to find a solution. Did I? Nope, I decided to work it out for myself.
No doubt others before me have come up with this one already, but I wanted to record the method for my own reference and (let’s be honest) savour a small but sweet victory over a common problem!
Caveat: I won’t deny it – this is a somewhat fiddly technique, so go slowly and carefully!
No-hole thumb gusset
In addition to your usual yarn and notions, you’ll need a locking stitch marker, and a crochet hook the same size as your needles or a little smaller.
- On the first round after you’ve put the thumb stitches on the holder, knit normally and don’t worry about that length of yarn spanning the gap, because you’ll fix it next round.
- On the second round, knit as per the pattern until one stitch before the gap (see photo, above).
- Slip the next stitch onto the crochet hook and pull a loop of the “gap” yarn through, as if you were rescuing a dropped stitch, and pop it onto your left needle.
- Knit that stitch as normal. Note that you haven’t added a stitch horizontally, only vertically, so it won’t affect the width of the glove body – in fact it will give you a bit more ease in the thumb gusset.
- If there’s still some slack, you’ll need to repeat the process with the next stitch, the one on the far side of the would-be gap:
- If you’re doing this at the beginning of a round (e.g. for a right-hand glove), put the previous stitch onto the stitch marker, because your needle is liable to slide out of it whilst you work the next stitch. If it does, don’t worry – just slide it back into the first stitch when you’re ready to knit the second one. You can even leave the marker in place until you’re done.
- Repeat steps 3 and 4. Be careful, as it may be a little tight.
- Remove the stitch marker (if used).
- Finish the round as normal.
If you still have a non-knitted length of yarn across the join you can repeat this process on the next round, though it probably won’t be necessary.
Either way, you should now have a nice solid thumbhole with no loose bits of yarn that will turn into holes!
The other thing I did was to pick up an extra stitch or two* when starting the thumb, regardless of how many the pattern said – enough, anyway, to ensure no holes. Also I worked a round of stocking (stockinette) stitch at the base of the thumb, even though the pattern said to go straight into single rib. To my mind ribbing doesn’t make a solid enough foundation for a join like this, and besides, if you’ve had to take up extra stitches it’s easier to decrease back down to the correct number in a plain stitch before you start the ribbing.
So, that’s how I knit a thumb gusset with no holes – hope you find it useful!
* Sure, you’ll have a thumb that’s a stitch or two wider at the base, but that’s the natural shape of most people’s thumbs, so I feel it’s no bad thing.
I don’t know about you, but convenient as online shopping may be, I like to see (and touch!) a new yarn in person before I buy. Not only is it hard to judge texture from a photograph, but even the colour may be different in real life from that shown on your computer screen. So, mostly I buy yarn in local shops, but their stock is inevitably limited, so it’s nice to go somewhere you can see many new brands of yarn – and of course buy some!
I went to British Wool Weekend in Harrogate last month, but that was very small, and I wasn’t able to make Yarndale, so when I saw that the Knitting and Stitching Show was coming to Alexandra Palace I jumped at the chance. After all, the train line from Cambridge to London goes right past Ally Pally, so it’s probably my closest big show. I left it too late to book in advance, and tickets on the door were limited, so I decided to go on the very first day, as soon as it opened. This turned out to be a great idea, as the show wasn’t too crowded and of course all the stalls were fully stocked.
I’d been very organised: I had a budget I wanted to stick to, plus a shopping list of yarns and buttons for upcoming projects, samples of yarn for button-matching and even a buttonband swatch for one cardigan. With the aid of much patience, I managed to get everything on my list, including some gorgeous aran weight Donegal Tweed from Craftspun, and beautiful buttons from Textile Garden. But did I stick to my budget? Yeah, not so much…
There were just so many beautiful yarns, not to mention must-have items like a KnitPro zipped case for my interchangeable needles, which tend to slide out of the fabric case I’ve been using. And then there were the half-price(ish) sweater packs. Two huge piles of them around the Black Sheep stand, near the middle of the largest exhibition hall. I trawled through them, picking up and discarding one after another, before eventually settling on one pack of Rowan Purelife recycled cotton/silk mix in a lovely marled lilac, and one of Debbi Bliss Rialto Aran in a glorious blood red.
So yes, my stash has ballooned as a result. I worked out I bought enough yarn for:
- 3 cardigans
- 2 lace shawls
- 2-3 pairs of socks
- 1 pair of gloves
Which might not sound like much, but when you consider that a) I’ve only been knitting seriously for about six months and b) I had to carry all that stuff back on the train, it was plenty, believe me! I’ve had to buy two more 24 litre storage boxes so that I have space for the sweater packs – I now have four of these boxes for my “clothing” stash, plus two under-bed boxes for yarn destined for gifts and household items (plus miscellaneous leftovers). As a result, whilst I’m not exactly going on a yarn diet, I’m going to limit myself to smaller purchases – no more sweater quantities until I’ve knitted at least one!
I don’t regret the extravagance, and I certainly don’t regret going to the show. In addition to being able to purchase new yarns, I was also able to stop and chat to several of the stall-holders, including Tracy and Kari-Helene from Purl Alpaca Designs, who gave me some really useful tips on how to adjust the Isis Tailcoat pattern to suit my (lack of) height. I also met Monica Russel, whose wellie toppers I’m making for my nephew and niece for Christmas (sssh!), and was able to ask her about an error in the printed pattern.
I’m thinking that next year, though, I’ll seek out more knitting-oriented shows – as its name suggests, The Knitting and Stitching Show has a lot of exhibitors focusing on embroidery and needlecraft. Whilst there was a fair selection of yarn stalls, there was almost nothing for the spinner or would-be spinner – I couldn’t find any spindles for sale, and whilst several stalls were selling roving and/or tops, most of it was aimed at felt-making. But now I know how useful such events are, I’ll definitely be heading to one of the big knitting shows such as Yarndale or Unwind. I just need to knit down my stash a bit before I dare go!
Any knitter worth her salt knows that the biggest threat to her lovely yarn is the clothes moth (Tineola bisselliella). Their larvae will eat most natural fibres, including wool, silk, cotton and linen – only your 100% synthetic yarns, e.g. acrylic, are safe. I don’t have a huge stash, but I love natural fibres, especially native ones like Blue-faced Leicester wool, so I need all the protection I can muster. So how do you keep them out?
Most people use a combination of plastic bags and boxes, often with cedar blocks or lavender sachets as further deterrent. However you don’t need to buy these latter when, at this time of year, you can pick up a free moth repellent that’s probably lying around in your local park. If you’re old enough to remember playing conkers at school, then like me you probably can’t resist picking up these beautiful shiny objects – but now they can be useful as well.
Horse chestnuts (Aesculus hippocastanum), known in the UK as conkers and in the US as buckeyes, contain a chemical, triterpenoid saponin, that repels clothes moths. You can use them to make a fancy hanger for your wardrobe, or just pop a few in each stash box to keep the moths at bay.
I’ve no idea if this really works, but since it costs nothing I’m going to give it a try!
(Note: whatever other precautions you take, make sure you check your stash regularly and air it out. Better to catch a few moths in your yarn than leave their children and grandchildren to munch through the whole lot!)
I keep doing this. And by “this”, I mean starting a blog and risk it gathering dust. I had a gardening blog once, but that didn’t last long (rather like my gardening!). I almost started a knitting blog a few weeks ago, but told myself I’d have too little to write about and should just hang out on Ravelry instead. But of course I can’t just blurt out every knitting-related thing that springs to mind, not unless I want to induce the online equivalent of backing away making hurried excuses…
And so here I am, setting up a new blog with the focus on knitting. It won’t be just about knitting, since I have other interests too, but it will be focused on the domestic sphere. If you want to know more about my novels and short stories, check out my main website. I have a blog there too!
(waits a bit…)
You back? Cool! So, on with the knitting blog!